Container Type Water Treatment Systems for Sustainable Clean Water Supply

During the installation phase of the facilities, container-type water treatment systems that do not require a building are installed to obtain quality and clean drinking water in factories, campuses, disaster areas, field hospitals, refugee camps, construction sites, temporary settlements, and places that need periodic drinking water.

Thanks to the technological innovations in our sector, solutions are provided with portable mobile water treatment systems to obtain quality and clean drinking water in areas without access to natural resources. Portable systems are also frequently preferred in factories and hospitals that do not have an installation area in the building.

Türkiye is one of the countries with the most active fault lines in the world. Seismic fluctuations in earthquake zones can adversely affect the drinking water infrastructure. Sustainable solutions are needed to avoid a shortage of clean water, which is vital in these regions. In disaster areas where access is remote or difficult to transport after an earthquake, the ideal sustainable solution is mobile water treatment devices.

There are different types of portable water purifiers, such as containers and trailers. They are the most widely used systems to purify and recycle water in remote areas.

Container-type water treatment systems are portable and can be installed at the source without needing a building or any construction process. All purification units installed inside buildings can also be designed in mobile systems. Necessary insulation is made in the container so the equipment is not adversely affected. In addition, a place has been prepared for installing air conditioners when needed. The entire assembly is highly protected against all weather conditions.

In portable mobile water treatment systems, all units purifying water in a container are installed with mechanical and electrical components. All mechanisms are fully assembled, ready for use quickly, and can be started immediately. Only water inlet, treated water outlet, and waste water outlet connections are established at the application site. Additional container systems can be connected when there is a need for an increase in production capacity over time in the application area. In addition, a backup generator can be added for electrical energy in addition to the main generator, considering the need and the conditions of the usage area, in case the device's energy is insufficient against the possibility of electricity and water cuts.

Riva Engineering provides services to all areas, regardless of brand, on behalf of established hospitals and dialysis centers, including disaster areas needing mobile treatment, with its units with high technological features. They are ready-to-use, nature-friendly, low-energy systems that can be easily moved to wherever the project area is. Drinking water stored by purification is immediately ready for use.

Our ready-to-use, plug-and-play container-type technologies can be designed with 20 ft and 40 ft options according to standard type container sizes. Our units have lighting and fast input and output connections. In addition, the system can be designed in special dimensions as the project requires.

Technical Specifications of RİVAMED Container Type Water Purifiers

The treatment units that make up the system can be listed as follows;

• Reverse Osmosis System is used to purify the water obtained from the water source efficiently and put it into service.
• Chemical Dosing, Ultraviolet Disinfection, and Filtration systems purify physical and chemical pollution. The system capacities differ according to the need and water quality
• Insulation and Heating System for efficient treatment of water, protection of the system, and optimization of ambient temperature
• Earthquake Resistant Piping, as the preferred water in disasters and emergencies, is one of the most basic requirements that can be used temporarily or permanently. 

With the logic of “Plug and Play”, it can be easily installed in areas where the need arises, with inlet water connection from treatable water sources such as sea, river, lake, pond, well, tanker, and mains. The purified water quality complies with the TS 266, WHO, and local drinking and potable water standards.

Production capacities can vary according to needs and range from 1,000 to 75,000 liters/hour. It also offers solutions to higher capacities determined as a result of the need. 

Purified Water Quality
WHO, TS 266 and local standards for water intended for human consumption.

Production Capacity
1,000 - 75,000 liters/hour. We can also provide solutions for higher capacities.

Raw Water Total Dissolved Solids
TDS < 2.000 mg/lt

Total Bacteria and Coliform Bacteria
<100 pcs/ml

Energy Consumption
Thanks to the most sensitive membrane filtration feature, it allows less energy to be used during production.

Assembly and Installation
All units are electrically and mechanically assembled, ready-to-use, immediately operable systems.
Lightweight and easy shipping

Standard Equipment

• There are submicron filters that provide extra protection.
• It can make audible and visual fault notification.
• IP44 resistance to liquid and solid objects. It has high protection against running without water.
• Lighting
• Fast in and out connections
• Noise isolation

Insulation and Heater

• Additional Services
• Generator can be added. It is beneficial to add it in terms of starting to produce its own energy.
• A new container can be connected in case of higher capacity requirement.
• Acid resistant epoxy and shutter
• Raw water tank and booster pumps

Our Documents

• TSE Service Qualification Certificate (HYB)
• Manufacturing Qualification Certificate
• Domestic Goods Certificate
• MDD 93/42/AT CE Certificate
• CE certificate
• ISO 9001:2015
• ISO 14001:2015
• ISO 45001:2018
• ISO 13485:2016
• Free Sale Certificate 

Our References  

(Some sample references where our mobile water treatment systems were previously installed for Disasters and Emergencies)

• In hygienic conditions, high-capacity production can be realized in accordance with TS 266 and WHO drinking water standards, with a production capacity of 1,000-75,000 liters/hour.
• Regardless of the source of the water, wherever there is no access to the source, thanks to mobile water purification technologies, every environment can be made ready for use by purifying it.
• Quality and reliable water is obtained from every source.
• Drinking water is ready for quick use as it is stored.
• The chemical structure of the water does not deteriorate.
• In all raw water sources, turbidity and sediments are separated and can be clarified.
• Ultraviolet disinfection systems destroy the DNA structure of bacteria and microorganisms and neutralize them, and new formations are prevented.
• Contaminants such as free chlorine, ozone, humic acid, and fatty acids are removed.
• Heavy metals such as arsenic, iron, and manganese dissolved in water are removed.
• Coarse particles such as sand and shaft, which are more than the specific gravity of the water, are separated.
• Turbidity and sediment are separated.
• Unwanted particles, all inorganic and organic substances, are filtered out.
• All substances that give smell, color, and taste are filtered.
• Stable >99% and minimum >96% salt removal occurs.
• With the purification processes, clean drinking water is obtained, and the minerals necessary for human health are kept in the water in natural spring quality. Our body needs these minerals to function healthily. 

Riva Engineering, after the Kahramanmaraş Earthquake in 2023, is actively working to obtain clean water in disaster areas, as in previous disasters and emergency requirements.

Located in disaster areas, with our RIVAMED technical team, we provide full support to dialysis units, field hospitals, and general health institutions that have damaged, deteriorated infrastructure, and insufficient water resources, by trying to repair the systems installed in every province and activate the damaged technologies and devices.